The Pore Cleansing Device with Replaceable Filters is engineered for deep sebum extraction, stratum corneum exfoliation, and micro-circulation enhancement. Addressing the critical failure of conventional consumer blackhead removers-where extracted sebum and cellular debris backflow into the pneumatic pathway-this platform integrates a sealed multi-layer filtration architecture.
By intercepting contaminants at the probe intake, the design protects the internal micro-motor from liquid and particulate intrusion, ensuring hygienic, long-term operation. Built for brand owners and private-label distributors, the unit features scalable aerodynamic profiling, customizable negative pressure thresholds, and comprehensive regulatory compliance for global retail entry.
Key Features
Isolated Multi-Stage Filtration: Intercepts sebum, keratin scales, and micro-dust before they reach the pneumatic pump, eliminating bacterial cultivation and motor degradation risks.
Closed-Loop Vacuum Regulation: Programmable micro-controller board (MCU) governs coreless motor RPM to maintain steady-state negative pressure, mitigating tissue trauma and capillary rupture risks.
Interchangeable Treatment Probes: Medical-grade silicone and PC components in targeted aperture geometries (oval, small round, large round, and micro-crystalline flat) tailored for specific facial regions.
High-Efficiency Coreless Motor: Low-vibration brushless architecture delivers stable extraction pressure while maintaining an acoustic output under 55 dB.
Sanitization-Resistant Enclosure: ABS/PC polymer shell withstands repeated commercial disinfection protocols using 75% isopropyl alcohol and quaternary ammonium formulations.
Technical Specifications
|
Parameter |
Specification |
|
Operating Voltage |
DC 3.7V (Rechargeable Lithium-ion Cell) |
|
Battery Capacity |
1000 mAh / 1200 mAh (Customizable capacity profile) |
|
Maximum Vacuum Pressure |
55 kPa - 65 kPa (Adjustable across 3 to 5 preset tiers) |
|
Charging Interface |
Type-C USB (Supports 5V/1A standard input) |
|
Charging Time |
Approx. 2.5 Hours (0% to 100%) |
|
Continuous Runtime |
90 Minutes (Tested at maximum suction threshold) |
|
Motor Type |
High-torque Coreless DC Motor |
|
Acoustic Noise Level |
Less than 55 dB (Measured at 30 cm reference distance per ISO 3744) |
|
Filter Replacement Cycle |
Recommended every 15-30 applications (Skin sebum profile dependent) |
|
Enclosure Material |
Medical-grade ABS with UV-cured matte or soft-touch coating |
Operating Modes
Mode 1 (Soft / Sensitive): Low-frequency pulsed negative pressure for thin skin zones around eyes and perioral areas.
Mode 2 (Normal / Daily): Continuous steady-state suction optimized for standard sebum extraction on cheeks and forehead.
Mode 3 (Strong / T-Zone): High-amplitude negative pressure for dense comedones and thick stratum corneum on the nose and chin.
Applications
DTC Skincare Brand Portfolios: High-margin electronic device addition to complement topical chemical exfoliants and clay masks.
Professional SPA & Aesthetic Protocols: Pre-extraction skin preparation device to soften sebum plugs prior to manual extraction.
E-Commerce Retail (Amazon / Shopify): Certified consumer electronic skincare hardware packaged with drop-test-verified retail boxes.
OEM & ODM Customization
Structural Engineering: Custom mold development for unique ergonomic housing geometries and proprietary probe designs.
Firmware Customization: Programmed adjustment of suction pressure safety caps, timer auto-shutoff intervals (default 5-minute safety cutoff), and battery indicator profiles.
Filtration Media Upgrades: Custom options including HEPA-grade or activated carbon-infused filter elements.
Visual & Packaging Branding: Laser-engraved or silk-screened logo, custom Pantone housing colors, and private-label retail packaging boxes.
Quality Control & Manufacturing Standards
Manufacturing occurs in an ISO 13485-compliant clean assembly environment backed by rigorous quality gates:
100% Pneumatic Leak Testing: Automated pressure testing on assembly lines to verify airtight seals and rated suction maintenance.
Motor Endurance Verification: Accelerated life-cycle testing running continuous cycles under simulated load to verify motor longevity (greater than 500 operational hours).
Material Biocompatibility: Probes and shell materials undergo skin-contact toxicity and irritation screening (ISO 10993 compliance).
Certifications: Produced under facilities holding ISO 9001, CE-LVD, CE-EMC, RoHS, and FCC compliance verification.
Packaging & Logistics
Standard Export Packaging: Individual protective blister tray, unit housing, 4 interchangeable probes, 10-pack replacement filters, USB Type-C charging cable, and multilingual user manual.
Master Carton Configuration: 40 units per master carton; gross weight approx. 11.5 kg; carton dimensions: 45 x 38 x 32 cm.
Logistics Compliance: Palletized sea freight and air express shipping compliant with UN38.3 lithium battery transport regulations.
Frequently Asked Questions
Q: How does the replaceable filter system prevent internal contamination?
A: The filter is positioned immediately behind the probe inlet, capturing all extracted sebum and moisture before air enters the internal ducting and pneumatic pump, eliminating mold growth risks inside the device.
Q: What is the Minimum Order Quantity (MOQ) for OEM branding?
A: Standard MOQ for private logo printing and custom packaging is 500 units. For full mold redesign, the MOQ is 3,000 units.
Q: Can we adjust the maximum suction pressure (kPa) to meet regional safety standards?
A: Yes. Firmware can be reprogrammed during production to cap maximum suction pressure at specific thresholds (e.g., 50 kPa vs 65 kPa) based on target market regulations.
Q: Can replacement filters be marketed as a recurring-revenue accessory for our brand?
A: Yes. We supply bulk-packaged replacement filter kits (packs of 20 or 50 pieces) designed to be co-branded, helping your brand establish a high-margin consumable revenue stream.
Request a Quote
Ready to expand your skincare hardware line with a reliable manufacturing partner? Submit your specifications below to receive a formal quotation within 24 hours.
Name / Company Name: [Input Box]
Business Email: [Input Box]
Project Scope: [Dropdown: OEM Customization / ODM Development / Sample Request / Bulk Order]
Estimated Annual Volume: [Input Box]
Technical Inquiries / Custom Requirements: [Text Area]
[Submit RFQ / Connect with Engineering Team]
