The USS-2026-ST is an ergonomic ultrasonic skin scrubber engineered for clinical skin management centers, high-end spas, and aesthetic device brands. Unlike portable consumer versions, this system integrates a weighted desktop charging & docking stand, ensuring stable countertop placement, continuous power replenishment, and hygienic storage in high-turnover salon environments.
Driven by imported piezoelectric ceramic transducers, the unit achieves non-thermal mechanical cavitation at 24kHz to 28kHz to clear sebum, comedones, and stratum corneum debris without manual extraction trauma. Manufactured inside a Class 100,000 cleanroom, we supply this unit as a fully customizable OEM/ODM platform.
Key Features
Precision Acoustic Cavitation: Powered by precision-bonded piezoelectric elements maintaining stable resonance ($28kHz \pm 1kHz$) under heavy load.
Docking Stand with Contact-Pin Charging: Eliminates dangling wires on treatment carts via a secure, weighted ABS base.
Surgical-Grade 316 Stainless Steel SpatulFeatures an angled 30-degree tilt conforming to facial contours, resistant to chemical sanitizers and acids.
Quad-Mode Circuitry: Integrated profiles for peeling, ion-exchange extraction, transdermal serum infusion, and low-frequency micro-current firming.
Protected Power Management: Built-in 600mAh lithium-polymer cell with over-voltage, short-circuit, and thermal cut-off ICs.
IPX7 Waterproof Handpiece: Ultrasonic welded ABS housing enabling safe wet-room operation and full immersion tip sterilization.
Technical Specifications
|
Parameter |
Specification |
|
Ultrasonic Frequency |
24 kHz to 28 kHz (plus or minus 1 kHz) |
|
Output Modes |
Peeling, Ion+ (Deep Clean), Ion- (Nutrition), EMS (Lifting) |
|
Spatula Material |
Medical-Grade 316 Stainless Steel |
|
Body Material |
High-Impact ABS with UV-Cured Coating |
|
Battery Capacity |
3.7V / 600mAh Rechargeable Lithium-Polymer |
|
Charging Interface |
Contact-Pin Docking Station (Input: 5V / 1A via USB Type-C) |
|
Charging Time |
2.5 Hours (0% to 100%) |
|
Continuous Runtime |
90 Minutes (At maximum load) |
|
Dimensions (Handpiece) |
172 x 42 x 18 mm |
|
Dimensions (Stand) |
85 x 85 x 60 mm |
|
Net Weight |
115g (Handpiece) + 120g (Stand) |
|
Operating Environment |
Temperature: 5°C to 40°C, Humidity: <= 80% RH |
Operating Modes
Peeling (Continuous Ultrasonic Waves)
Atomizes residual surface moisture to clear dead corneocytes and sebum plugs at 28kHz.
Ion+ (Positive Ion Export)
Combines galvanic direct current with ultrasonic vibration to draw out negatively charged deep-pore impurities.
Ion- (Negative Ion Import)
Reverses polarity to push water-soluble active ingredients through the epidermal lipid barrier.
EMS (Micro-Current Pulse)
Delivers low-frequency electrical impulses to stimulate dermal micro-circulation and temporary muscle tightening.
Applications
Professional Aesthetic Clinics: Pre-treatment stratum corneum preparation prior to chemical peels or laser resurfacing.
Medical Spas & Day Spas: Routine comedone extraction and painless pore cleansing as a standalone or introductory treatment.
Aesthetic Brand Portfolios: High-margin countertop device additions for retail distribution or professional salon supply lines.
OEM & ODM Customization
Equipped with in-house CNC mold workshops, SMT lines, and a Class 100,000 cleanroom, our volume capacity supports a stable daily output of 3,500 units:
ID/MD Engineering: Silhouette modification, docking geometry, and tactile switch redesign.
Firmware Tuning: Adjustable oscillation frequency ranges (24kHz to 30kHz) and custom cycle timing.
Branding & Finish: Laser engraving, silk-screen printing, Pantone color matching, and anti-fingerprint rubberized coatings.
Packaging: ISTA-certified drop-test-approved gift boxes and multilingual manuals.
Quality Control
Enforced via our manufacturing execution system (MES):
Raw Material Inspection: Spectrometer testing verifying 316 stainless alloy composition against corrosion pitting.
Transducer Tuning: Automated acoustic impedance testing ensuring maximum energy transfer of the ceramic core.
PCB Functional Test (FCT): 100% automated test fixtures verifying resonance frequency, current draw, and protection thresholds.
Water Resistance Testing: Air-pressure leakage decay testing and IPX7 immersion tests per ISO 2859-1 (AQL 1.0).
Aging Test: 4-hour continuous operational burn-in test at 40°C prior to final assembly.
Compliance: Manufactured under ISO 13485 and ISO 9001 systems; components carry CE, FCC, and RoHS test reports.
Packaging & Shipping
Standard Industrial Packaging: Handpiece, stand, and cable housed in an anti-static blister tray inside a rigid paperboard box.
Master Carton Specs: 20 sets per master carton; dimensions: 450 x 350 x 320 mm; gross weight: approx. 9.8 kg.
Logistics: Container stuffing compatible (20GP / 40HQ); DDP, FOB, and EXW terms supported.
Frequently Asked Questions
Q: What is the MOQ for OEM branding and custom packaging?
A: 500 units. For complete mold redesign (ODM), the MOQ starts at 3,000 units.
Q: What is the bulk production lead time?
A: 25 to 30 days following sample approval and deposit receipt, backed by our 3,500-unit daily capacity.
Q: Can the ultrasonic frequency be adjusted?
A: Yes. Driver circuit parameters can be tuned between 24kHz and 30kHz during the ODM phase.
Q: What warranty and spare parts support do you provide?
A: A 12-month manufacturing defect warranty from the Bill of Lading date, plus a 1% spare parts allowance (circuit boards and batteries) included with bulk shipments.
Request a Quote
Contact Name / Company Name:
Business Type: (Brand Owner / Distributor / Clinic Chain / Importer)
Project Type: (OEM Customization / ODM Development / Wholesale Stock)
Estimated Annual Volume:
Target Delivery Port:
[Submit Inquiry / Request Technical Data Sheet]
